Twist

FT

Twisting mechanism jig for planar samples

  • Jig Model Number: DMX-FT
    Sample: Planar objects
    Sample Thickness: 1mm (0.039") maximum
    Sample Size (mm): 30mm x 60mm to 210mm x 300mm (W x L)
    Sample Size (inches): 1.18" x 2.36" to 8.27" to 11.8" (W x L)
    Torsion Angle: 7 ~ ±90º
    Torsion Speed: 5 ~ 90 rec/min
    Torsion Torque: 1.8 Nm (1.33 foot pounds) maximum
    Weight - Jig: 3.4 kg (7.5 lb)
    Weight - Cover: 2.3 kg (5.1 lb)
    Dimensions (mm): 272mm x 512mm x 273mm (WDH)
    Dimensions (inches): 10.7" x 20.2" x 10.75" (WDH)

TW

  • Jig Model Number: DMX-TW
    Sample Thickness: φ 0.8 ~ 10mm (0.031 ~ 0.394")
    Sample Width: 30 mm (1.18") maximum
    Sample Thickness with Pin-Vise Option: φ 0.1 ~ 10mm (0.0039 ~ 0.394")
    Sample Size (mm): 0 ~ 208mm (8.19") + holding spaces
    Torsion Angle: 0 ~ ±270º
    Torsion Speed: 5~90 rec/min (when ±45º)
    Torsion Torque: 1.8 N m (1.33 ft lb) maximum
    Weight - Turning Chuck: 0.3 kg (0.66 lb)
    Weight - Following Chuck: 1.6 kg (3.5 lb)
    Weight - Cover: 0.7 kg (1.5 lb)
    Dimensions (mm): 166mm x 286mm x 248.5mm
    Dimensions (inches): 6.53" x 11.3" x 9.789"

Twisting mechanism jig for linear sample

TWZ Torsion Module 

  • Twisting Test
    Twisting Type
    Twisting around a Cylinder
    Module Material
    PK-450 and SUS304
    Sample Width
    70 mm maximum
    Sample Length
    100 mm maximum
    Sample Thickness
    2 mm maximum
    Core Radius
    40 mm maximum
    Twisting Angle
    Limited only by motor drive and sample
    Weight
    None needed
    Liquid
    Pure water, Tap water, Saltwater (as sweat)
    Consult with us for special liquids
    General operating conditions 
    Humidity
    15 ~ 85% RH
    Use in Ambient Conditions 
    -40'c to 90°C (+194°F) maximum
    Use in Extreme Environmental Chambers
    -40°C ~ +160°C (-40°F ~ +320°F)
    Use with Liquid immersion cylinder in Environmental Chambers 
    -40°C ~ +200°C (-40°F ~ +392°F)
    Components
    Base Plug
    About 2.1 kg (4.6 lb) per unit (2 units)
    Support Plug
    About 2.1 kg (4.6 lb) per unit (2 units)
    Acyrlic Case
    About 0.5 kg (1.1 lb) per piece (2 pieces)
    Twisting Core
    About 0.9 kg (2.0 lb)

Twisting samples for ambient, extreme hostile & liquid immersive environments (incl. salt corrosion)

Tutorials

Twisting mechanism - FT

Twisting mechanism - TW